Additional components for the Fusion staff system.
Double Adapter
Converts a full-length dragon staff into a pixie dragon staff, or a fire staff into a short fire staff.
| Spec | Value |
|---|---|
| Material | 7075 Grade Aluminium |
| Weight | 80g |
| Tolerance | +/-0.05mm |
| Compatibility | Exact supported tube/end combinations need confirmation |
The earlier blanket “any tube with all standard fusion parts” wording was not established by this interview.
End Caps
End caps are required when fitting V3 hubs to carbon-fibre Pure ends. Insert the cap into the open end of the carbon tube before clamping the hub. The cap supports the tube internally; without this support, the V3 clamp will crack the carbon.
The existing product reference is the 22mm Fusion Removable End Cap.
Correction (2026-09-07): These caps were previously described as recommended. Jason confirmed they are required for this configuration; the need for support is not limited to excessive tightening.
See also
- Fusion — full product overview
- Fusion Handle — the handle the Double Adapter replaces