Fusion Spin Fire End - Single

Compact for Travel

Like all Fusion Staffs, they setup in seconds by simply twisting the handle. The key to the system is the highly engineered patented locking mechanism that's simple to use and provides superior strength with no wobble or rattle – That's super important for a balanced flow.

The kit is super compact – packing down to about one-third its size when disassembled. With the solidly machined connector, it has no moving parts and collapses down instantly.

Interchangable

The Fusion system is totally modular and has been designed to fit any 22mm tubing, which means you can swap the ends to glow, fire, contact, or dragon ends.

Fusion Troubleshooting

Experiencing issues with your Fusion Staff?
Watch videos on some troubleshoot tips for your Fusion Products Fusion Troubleshooting

Read up on maintenance tips Here.

We offer three types of grip for our spinning and Fusion gear: Silicone, EPDM, and F-Grip. Each has their own unique properties; read on to find out which is best suited to you.

Feature	Silicone	EPDM	F-Grip Tube
Feel	Smooth and most firm	Most soft and spongy	Grippy and may feel more rough
Grip	Great grip when dry, but slippery when wet	Best grip in all weather conditions	Grippy in all weather conditions
Thickness	1.5mm	2mm	2mm
Durability	Long-lasting	Wears out quickest and leaves residue during use	Long-lasting
Replacement	More difficult at home without an air compressor	Easy to replace at home - wraps on	Can be done at home with our F-Grip Installation Kit

 

Silicone

Silicone is an environmentally sound, clean product. It's washable and very durable. It's the longest lasting grip and provides excellent grip when dry. It does suffer when wet, whether that be from humidity or sweat, which is it's only real downfall. It's transparent so you can see the spacing markers underneath which is great for learning and practice.

+ Extremely long-lasting – you wont have to replace it often
+ Excellent grip in dry conditions
+ Fully washable to keep it looking and feeling new
+ Spacing markers

- Doesn't handle wet conditions/sweat well. You may have to wipe it down with a dry cloth occasionally during use. 
- More difficult to replace at home
- Cannot be used on one-piece staffs

 

EPDM

EPDM is simply a black foam strip. The foam is soft, grippy and stays grippy in most situations – even when wet. It does leave some black residue on skin after use as the foam is uncoated to maximise grip and it will need to be replaced after a while once it wears out.

+ Great level of grip
+ Grippy in wet or dry conditions
+ User replaceable at home

- Wears out – you will have to replace this grip sooner than other grips
- Leaves black residue on skin

 

F-GRIP TUBE

F-Grip is our newest grip. The F stands for Fusion as it is our most well-rounded grip yet. It is made of natural rubber and stays grippy wet or dry. It's super durable so you won't have to replace it often. It's a rubber tube and features coloured spacing markers so you know where the centre is. 

+ Great level of grip
+ Grippy in wet or dry conditions
+ Durable
+ User replaceable at home
+ Spacing markers 

- Rougher texture

*This is different from our wrapped-on F-Grip. If you require our old style wrapped F-Grip, please contact us.

Made by Spinners for Spinners

We're fire spinners too and know what a great staff feels like. We've been making fire staffs for over 20 years and have been continually improving our design to bring you the highest quality fire twirling equipment on the market.

Kevlar

Burns well over 100 times! Fire resistant Kevlar wicks withstand 100's of burns, offering super long-lasting flames. The Kevlar absorbs the fuel, then once lit the fuel is burnt, leaving the Kevlar intact.

EPDM

Gripped with EPDM for a grippy and comfortable feel.

EPDM is a type of synthetic rubber known for its durability against environmental wear and tear. This grip is tacky and padded with all the hard-wearing benefits.
EPDM stays grippy even even when wet which may make it better suited for play in humid climates. It is also user-replaceable at home with our EPDM Grip available per meter.
It has a cushioned feel with a 2mm thickness, perfect for softening catches, this makes it great for beginners and experienced spinners alike.

Strong Aluminium Tubing

Made from extruded 7075 Aluminium tube. It's the perfect balance between weight and strength, which means you'll enjoy this staff for years.

Perfectly Weighted

Our design ensures that there's more weight on the ends, which is where you want it, to help the staff build momentum as you spin. A balanced weight; Not too heavy, not too light.

WARNING & ACKNOWLEDGMENT OF RISK

Fire spinning is an inherently dangerous activity involving significant risk of physical injury, death, or property damage. This equipment is designed strictly for use by professionals or individuals who are practiced, trained, and confident in their skills, and who have a full understanding of the risks involved.

By purchasing this equipment, you acknowledge that:

1. You are a practiced and competent operator.

2. You will ensure appropriate supervision and safety measures are in place at all times.

3. Any use of this equipment outside of these Fire Safety Guidelines or by unpracticed individuals constitutes abnormal use under the Australian Consumer Law.

Here are some of our best tips to get the most out of your fire props as well as how to light up with the safety of yourself and others in mind.

PREPARING YOUR NEW WICKS

It is important to properly prepare the wick before every burn to ensure you are both lighting up safely as well as prolonging the life of the wick as much as possible.

• Pour your fuel in a safe fuel container that will allow you to immerse your wick completely in the fuel.
• Soak the wick in the fuel until it is completely soaked through, approx. 10 mins.
• All successive burns only require a short dip in the fuel before burning. Just enough to get the wick wet.
• Shake out or spin off excess fuel from the wick after dipping and before lighting. 
• ALWAYS IGNITE AWAY FROM FUEL CONTAINERS!
• It's a good idea to put the flame out before it naturally runs out as this makes sure only the fuel is burnt and stops the wick itself from burning.

MAINTENANCE & CARE

Following proper maintenance care will prolong the life of your fire toys to get as many burns as possible out of them.

• Never leave the wick smouldering – once the flame has burnt out, completely put out with a damp 100% cotton towel.
• Check your equipment before each use for any damage, to ensure it is safe to use and spin.
• Check for loose screws and tighten if any are loose.
• Replace any broken or damaged parts immediately.
• Protect the wicks when not in use with wick covers (socks work well for this).
• If the wick is frayed, trim before lighting up again.
• To prolong the life of your wicks avoid dropping or hitting the Kevlar wicks onto concrete or hard and abrasive surfaces or objects.
• Treat your items with care and use as intended. 

SPIN SAFELY

As much as spinning with fire is heaps of fun, it's just as important to do it safely. These tips and procedures should always be followed, no matter how many times you've lit up before.

FUEL
• We highly recommend our FIRELIGHT FUEL; Itʼs a clean burning, low odour fuel.
• Your fuel container should have a secure lid that will not spill if it is knocked over. Always keep your fuel container stored far away from any flames and away from any fire spinning.
• Your fuel container should be labelled that it contains flammable and dangerous goods, including the name of the fuel. 
• Kerosene/Citronella are also options. Each fuel has different properties such as volatility, burning temperature and flashpoint. You can find out these specifications in the chemical's MSDS. 
• Do not use unauthorised or unsafe fuels (e.g., Petrol/Gasoline).
• Store fuel away from children and away from where you are spinning and away from where any fire will be.

FIRE SAFETY EQUIPMENT
• Always have a fire extinguisher and/or a damp 100% cotton towel on hand.
• Fire safety equipment should be kept in close proximity so that easily accessible if needed.
• Your fire safety assistant should be trained how to use these items safely and be in charge of where they are located.

WHAT TO WEAR
• Never wear loose or highly flammable synthetic clothing (natural, tight fitting fabrics are best). 
• No dangly items worn.
• Keep long hair tied back.
• Lightly wet your hair if possible before spinning.
• Avoid the use of hairsprays, gels, and other products.

SAFETY ASSISTANT
• Never spin alone. You should have someone else with you that is also comfortable around fire and knows first aid for burns. This person should also be watching your surroundings and if in public, act as the 'crowd control' and make sure your spinning area is big enough.
• Adult supervision and consent is required for persons under 18 years old.

ENVIRONMENT
• Fire spin outdoors only.
• Spin on flat ground that is dry and free of any slip hazards.
• Do not spin in dry bushland or forests as this can cause bush/forest fires. 
• Spin away from any obstacles (around and overhead) and be observant to who and what is around you.
• Be responsible for your own and otherʼs personal safety.
• Please respect any local and/or state fire bans and restrictions.
• Obtain any permits if required to spin in public places, varies from county to country.

EQUIPMENT
• Be aware of the props that you are spinning with and its intended use and its limitations
• Remember that Carbon Fibre is heat proof, but not flame proof. Precautions should be taken with this in mind such as keeping the prop moving to control the flame and taking wind direction into consideration to keep the flame away from you and the Carbon Fibre. 
• Remember that while Aluminium is flame and heat proof, your hands are not! Aluminium gets very hot where it is close to the flame so you should be careful to only touch the gripped part of the product while spinning to avoid burns.  
• Products should only be used for its intended use and misuse of products can result in injuries and damage to your toy. 

CONTROL THE FLAME
• Know the nature of fire. Fire will always burn from the bottom up, so when holding fire stationary be intentional with how you are holding it. For example, hold hoops horizontally so the flame does not touch the tubing. Keep poi gently swaying to keep the heat away from your hands. Hold fans upward away from the body or horizontally away from the body.
• Once lit always keep the flame moving, even if slightly, to help control the flame and the heat. Avoid remaining motionless and start spinning and moving the prop as soon as safely possible.
• Be aware of the direction of the wind and how it affects the flame. Usually you would want the wind at your back so that it blows the flame away from your body and not toward you.

TRICKS
• Never light up until you are comfortable, practiced and confident with the prop without fire.
• Take it easy for your first light-up, there's no rush to spin with fire. 
• Do not learn or practise new tricks when lit-up.

First Aid

In the case of an accident or burn, it's important to know the steps to take before it happens.

WHAT TO DO IF CLOTHING CATCHES FIRE

 

1. Follow DRSABCD

   Danger - Response - Send for help - Airway - Breathing - CPR - Defibrillation

2. Remember STOP, DROP & ROLL

3. Stop the person from moving around.

4. Drop the person to the ground and cover or wrap them in a fire blanket, 100% cotton wet towel or similar, if available.

5. Roll the person along the ground until the flames are extinguished.

6. Extinguish any burning props and ensure the area is safe. 

7. Manage the burn.

FOR ALL BURNS

1.  If the burn is severe or if it involves the airway, call triple zero (000) for an ambulance.

2. As soon as possible, hold the burnt area under cool running water for 20 minutes.

3. Remove any clothing and jewellery from the burnt area, unless they are stuck to the burn.

4. Cover the burn with a light, loose nonstick dressing, preferably clean, dry, non-fluffy material (eg plastic cling film).

5. Continue to check the patient for shock, and treat if necessary.

 Seek medical advice if the burn is deep or larger than a 20 cent piece.

Reference: St John's Ambulance 

QUALITY

We use only quality materials to maximise safety, durability and fun.
Now you are ready to light up and express your unique self, exploring your skills and becoming part of the worldwide fire community.