Fusion Contact LED Staff

The most versatile collapsible Contact LED Staff on the market. Designed in Burleigh Heads, Australia, the Fusion Contact LED Staff packs down into three pieces for travel and locks back together with our patented compression lock, so there is no wobble and no rattle when you roll.

Built for body rolls

The Fusion contact build is gripped over most of its length, giving you a consistent 25mm gripped surface to roll across your arms, chest and back. It comes fitted with our F-Grip natural rubber grip: very grippy, very durable, and still reliable once you start sweating.

Hybrid LED ends

Each end is aluminium nearest the handle and polycarbonate nearest the tip. The aluminium section keeps the end stiff and wobble-free, while the polycarbonate section glows from a single Lumi rechargeable light unit fitted at the tip. Lumi light units are the same ones used across our Lumi and Prism ranges, so spares and replacements are easy.

Choose your build

• Handle: aluminium or carbon fibre. Carbon fibre saves around 55g and is our most popular choice.
• LED Ends: Lumi LED with Standard Caps finishes each tip with a soft silicone cap. Lumi LED with Prism Heads adds a prismatic silicone pod on each tip, lit by the same unit so tube and pod glow together. Flowtoys Capsule ends are also available in the builder.
• Length: 1400, 1500, 1600 or 1700mm. Stand the staff on the ground beside you. For contact it should reach somewhere between your chin and mid-chest.
• Flowers (optional): slow the roll down and make body rolls easier to learn. A great pick if you are new to contact.

Lights and charging

Double tap to turn on, tap for the next mode, hold to turn off. Four brightness levels, a choice of starting on mode 1 or your last-used mode, and Juggle (slower) or Spin (faster) pattern groups. A single tap while off shows the battery level. To charge, pop off the cap or Prism head and plug in with USB-C. Red means charging, green means full.

How it goes together

Push each end over the O-ring on the handle connector until the join sits flush, then twist until tight. Twisting expands the rubber inside the tube into a compression lock that holds the end firmly, and the O-ring keeps metal off metal so nothing rattles. Twist the other way to pack down.

Part of the Fusion system

Every Fusion part is interchangeable. Take off the caps or Prism heads and push on a pair of Lumi LED Dragon Heads and this becomes an LED dragon staff, with the ends and heads glowing together. Swap in aluminium fire ends and the same handle becomes a contact fire staff. Fit the Double Adapter in place of the handle for a short staff.

Specs

Weights are per piece with F-Grip. LED ends include the light unit, battery and cap. All weights are approximate and may vary slightly between batches.

Prism Head end weights are coming soon. Total staff weight is one handle plus two ends. Tube is 22mm outside diameter, about 25mm with grip.