LUMI LIGHT INSTRUCTIONS
Turn On
Double Tap or Hold (1 Sec)
Check Battery
Tap when off
Green=70%+ Yellow=30%+ Red=30%-
Next Mode
Tap
Previous Mode
Double Tap
Turn Off
Hold
Brightness Control
Four taps (from off)
Cycle through the four brightness levels. The default level is Level 3. Max is Level 4.
Single Click to cycle,
Long Press to save.
Start-up Mode
Five Taps (from off)
Choose between starting from your last used mode or resetting to the first mode upon power-up.
Green Flash = Start on Last Used
Orange Flash = Start from Mode 1
Flow Mode
Six taps (from off)
Toggle between Juggle (Slower) and Spin (Faster) mode groups to instantly change the speed and style of your light patterns.
Pink Flash = Juggle Mode
Blue Flash = Spin Modes.
24 ADVANCED COLOUR MODES
METEORS - STROBES - RAINBOWS - SOLIDS
SPIN - Fast Mode
Optimized for high-speed movement. This mode ensures patterns remain crisp and vibrant during fast spins and rapid transitions.
JUGGLE - Slow Mode
Optimized for technical, rhythmic movement. This mode enhances pattern detail and trail visibility when the prop is moving at a slower, controlled pace.
Charging Cable / Power Warning!
Charging Cable included. Power adapter not included. Use only a standard USB power adapter: 5V, up to 2A (10W max). Regular phone chargers (5V 1A or 2A) are safe. Do not use fast-charge or high-voltage adapters (9V, 12V, 20V) - this may overheat the cable, damage the poi, or cause a fire hazard.
LIGHT UNIT SPECIFICATIONS
Voltage = 3.7 V
Charging Port = USB-C
Battery Life = 16 hrs (depending on the mode)
Charging Time = +/- 2 hrs
Pull the cord knot out to the Silicone Knob. You can now undo the knot and re-tie it to your desired length. Cut the excess and melt the ends of the knot using a lighter to stop fraying. Slide the silicone knob over the Knot. Time to play!